My 4x4 project 07-18-2015, 07:01 AM
#1
I am a prepper/survivalist and I enjoy the outdoors so having an off-road capable vehicle is important. My father decided to sell his 1998 Chevy Blazer LS 4x4 and I told him not to that I want it and he can have my car if I can have his Blazer.
He agreed on it. All the Blazer needs is the transfer case encoder motor because she is stuck in 4hi and the switch is fine, the vacuum is fine so that leave it to the encoder motor.
Other then that she started pissing gas by the tank which the tank was replaced with a new fuel pump and sending unit a year ago so I have to pin point that leak and then after all of that it should be good to go then I will focus on some off-road work.
I am going to put a 2" lift on it, a LSD, do some water proofing and install a snorkel, add a solar panel on the roof, install a small battery bank, charge controller and inverter, a front winch and that's about it for now.
I don't want to go too crazy because it needs to be road worthy.
He agreed on it. All the Blazer needs is the transfer case encoder motor because she is stuck in 4hi and the switch is fine, the vacuum is fine so that leave it to the encoder motor.
Other then that she started pissing gas by the tank which the tank was replaced with a new fuel pump and sending unit a year ago so I have to pin point that leak and then after all of that it should be good to go then I will focus on some off-road work.
I am going to put a 2" lift on it, a LSD, do some water proofing and install a snorkel, add a solar panel on the roof, install a small battery bank, charge controller and inverter, a front winch and that's about it for now.
I don't want to go too crazy because it needs to be road worthy.




![[+]](https://sinister.li/images/modern/collapse_collapsed.png)



















![[Image: 7ajmN5P.jpg]](https://i.imgur.com/7ajmN5P.jpg)

