Beginner Electronic Hacking: Introduction 03-21-2014, 06:43 AM
#1
Introduction:
What is hacking? Well, to me, hacking is when you take something and alter it so that it does something other than the original intentions.
So in order to hack some electronics you will need a few things:
So in order to hack some electronics you will need a few things:
- Screwdriver(s) [Flathead, Phillips. Eye-glasses screwdrivers]
- Soldering Iron
- Pliers
- Wire-stripper
- Wire
- Tweezers
- Magnifying Glass (Optional)
- De-Soldering Pump (Optional)
Some of this may seem unneeded but as you hack more and more electronics you will need more and more tools. Wire is generally found in abundance in scrap electronics in which you can salvage from.
Popular Places For Electronics
- Hardware Stores (Tools and Wire)
- Thrift Shops (Old electronics, cheap)
- Goodwill (Really, really cheap electronics- good for salvaging.)
- AMAZON. (EVERYTHING. Slightly Expensive at times and not always reliable.)
Really, the best advice I can give you is this: experiment. Shock yourself a couple times, but never screw around with outlets, stick to battery-electronics until you are good.
If you guys liked this let me know in the comments, and if I see that a decent amount of you guys liked it, I will make more tutorials. Some ideas I have include:
- Tips for soldering wires to circuit boards
- Video Tutorials
- Basic circuitry calculations (voltages, current, resistance, etc.)
- How to safely take apart electronics
- Hack Project Ideas
Scientia potentia est
![[Image: inkexplosion.jpg]](http://i0.wp.com/techverse.net/wp-content/uploads/2013/09/inkexplosion.jpg)




![[+]](https://sinister.li/images/modern/collapse_collapsed.png)









I also think this is in the wrong section.
![[Image: dHJ4Beo.gif]](http://i.imgur.com/dHJ4Beo.gif)












![[Image: yqussv.png]](http://a.pomf.se/yqussv.png)












![[Image: F4Z9Dqw.png]](https://i.imgur.com/F4Z9Dqw.png)

![[Image: R5aCcWV.png]](http://i.imgur.com/R5aCcWV.png)