Login Register






Macchanger script filter_list
Author
Message
RE: Macchanger script #21
(02-28-2014, 11:27 AM)Ligeti Wrote: Can you ping the router? Are you using mac filtering? Is it wireless interface? What is your ifconfig? And route -n? Also... Try to reconnect using the network-manager.
^
This

I would say it's most likely a mac filtering issue but without knowing the output of Ligeti's post along with any error messages you receive it will be very difficult to pinpoint the issue
If you need help feel free to PM me
[Image: klfpJD]
Probitcoin
Freebitcoin
BTC clicks
bitcoin wallet:
1FBPAanbs3rJU9BUpobpDJc9hHUaCaC25N

Reply

RE: Macchanger script #22
Routers do have option like MAC-Filtering which allow a system to connect to a network(Internet won't work but you will connect) if it's MAC is listed. See if you have this enabled, Disabling it might help if it's has been setup
My Blog: http://www.procurity.wordpress.com
Donations: 1HLjiSbnWMpeQU46eUVCrYdbkrtduX7snG

Reply

RE: Macchanger script #23
* No MAC filtering
* Same problem on ethernet and wireless
* Reconnect with network manager doesn't change anything
* If I change the MAC address before connecting, it works
* It works fine using my phone as wifi tether and reconnecting with network manager after changing the MAC address
* I can ping the gateway

Reply

RE: Macchanger script #24
(02-28-2014, 01:34 PM)hunt3r972 Wrote: * No MAC filtering
* Same problem on ethernet and wireless
* Reconnect with network manager doesn't change anything
* If I change the MAC address before connecting, it works
* It works fine using my phone as wifi tether and reconnecting with network manager after changing the MAC address
* I can ping the gateway

At this point I'm starting to think it could be a bug, possibly not within macchanger but possibly network manager after doing a little research I found an article describing this issue and the solution appears to be to append "restart network-manager" to the end of the script/alias so you could try that and see if it makes any difference
If you need help feel free to PM me
[Image: klfpJD]
Probitcoin
Freebitcoin
BTC clicks
bitcoin wallet:
1FBPAanbs3rJU9BUpobpDJc9hHUaCaC25N

Reply

RE: Macchanger script #25
Gonna try this so ! ;-) thanks fir your help

Reply

RE: Macchanger script #26
Not a problem
If you need help feel free to PM me
[Image: klfpJD]
Probitcoin
Freebitcoin
BTC clicks
bitcoin wallet:
1FBPAanbs3rJU9BUpobpDJc9hHUaCaC25N

Reply

RE: Macchanger script #27
Hello, I tried restarting network-manager and it worked. I uploaded the new code with an option to stop and start network-manager in the menu

Reply