[IpLayer]

Hi,I've Cracked some AP,and I gain the Password,But I can't Connect to the Network!!
In windows it say Limited access,and in linux and samsung Galaxy it stuck on Obtaining IP address..
I've tried to change my mac address to his mac ,but it didn't work
and tried to use static IP:
IP address : 192.168.1.17
subnet mask:255.255.255.0
Defaul gateway:192.168.1.1
Didn't work either..
When i connect in limited access the autoconfiguration IP4 being like : 169.254.70.2
IPv4 subnet mask 255.255.0.0
the signal is fair in windows and about -84 in commview and about 30% in linux ,I don't think it's signal Problem?!
Any Idea?

[IpLayer]

Hi,I've Cracked some AP,and I gain the Password,But I can't Connect to the Network!!
In windows it say Limited access,and in linux and samsung Galaxy it stuck on Obtaining IP address..
I've tried to change my mac address to his mac ,but it didn't work
and tried to use static IP:
IP address : 192.168.1.17
subnet mask:255.255.255.0
Defaul gateway:192.168.1.1
Didn't work either..
When i connect in limited access the autoconfiguration IP4 being like : 169.254.70.2
IPv4 subnet mask 255.255.0.0
the signal is fair in windows and about -84 in commview and about 30% in linux ,I don't think it's signal Problem?!
Any Idea?

[IpLayer]

Hi,I've Cracked some AP,and I gain the Password,But I can't Connect to the Network!!
In windows it say Limited access,and in linux and samsung Galaxy it stuck on Obtaining IP address..
I've tried to change my mac address to his mac ,but it didn't work
and tried to use static IP:
IP address : 192.168.1.17
subnet mask:255.255.255.0
Defaul gateway:192.168.1.1
Didn't work either..
When i connect in limited access the autoconfiguration IP4 being like : 169.254.70.2
IPv4 subnet mask 255.255.0.0
the signal is fair in windows and about -84 in commview and about 30% in linux ,I don't think it's signal Problem?!
Any Idea?

[Boxingfan]

I understand that this is not related to the post but would you happen to know any good HTML editors?

[Boxingfan]

I understand that this is not related to the post but would you happen to know any good HTML editors?

[Boxingfan]

I understand that this is not related to the post but would you happen to know any good HTML editors?

[chmod]

I understand that this is not related to the post but would you happen to know any good HTML editors?

Stay on topic

[chmod]

I understand that this is not related to the post but would you happen to know any good HTML editors?

Stay on topic

[chmod]

I understand that this is not related to the post but would you happen to know any good HTML editors?

Stay on topic

[dR.0xYw0Rm]

Sometimes that problem it's due to IP address conflicts on the computers, try to Release and Renew an IP Address.

Start > Run > CMD

Code:

ipconfig /renew ipconfig /release

And you can also refresh all DHCP leases and re-register DNS names using the registerdns command.

Code:

ipconfig /registerdns