[yaswanthraj]

Hey there I am trying my Ass off to make BT4 2 detect wireless card...But in Vain !!

My Wireless card:

Broadcam 802.11n

I tried
http://www.backtrack-linux.org/forums/ba...track.html

But none worked...
Am kind a getting this

WARNING: Symbol version dump /usr/src/linux-source-2.6.39.0

Problem

I am newbie in BT..plz help me out!!!! Guide me plzz

[Liyan Oz]

# lspci | grep Network

# modprobe -l | grep [your wifi ]

Code:

iwconfig wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off iwlist scan lo Interface doesn't support scanning. wlan0 Interface doesn't support scanning : Network is down iwconfig wlan0 up SIOCSIFFLAGS: No such file or directory dmesg | grep rt [ 3816.447375] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware. [ 3835.720689] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware. i solved the problem with installing debian package ralink firmware : firmware-ralink_0.14+lenny2_all.deb dpkg -i firmware-ralink_0.14+lenny2_all.deb Selecting previously deselected package firmware-ralink. (Reading database ... 298616 files and directories currently installed.) Unpacking firmware-ralink (from firmware-ralink_0.14+lenny2_all.deb) ... Setting up firmware-ralink (0.14+lenny2) ... iwlist scan wlan0 Scan completed : Cell 01 - Address: 00:25:69:01:1E:BD Channel:1 Frequency:2.412 GHz (Channel 1) Quality=66/70 Signal level=-44 dBm Encryption key:on ESSID:"AT DJAWEB_1EBC" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s Mode:Master Extra:tsf=0000000764571189 Extra: Last beacon: 1076ms ago IE: Unknown: 000E415420444A415745425F31454243 IE: Unknown: 010882848B962430486C IE: Unknown: 030101 IE: Unknown: 2A0104 IE: Unknown: 2F0104 IE: Unknown: 32040C121860 IE: Unknown: DD090010180202F4000000

for install tools yous this script

Code:

#!/bin/bash # ,__ net=1 # ¡ ` ( W I R E L E S S I N S T A L L E R root=1 # | _ .·<( <<noesis/code | blaksark@gmail.com # ª_/() ( http://tinyurl.com/by-nc-sa-3-0 # |\` `, # _·' l " Use this code if you like it, just credit me at bottom " ((net))&&ping -c1 gmail.com > /dev/null||{ echo -e '\n\e[1;31m (!) Internet required\e[m\n'&&exit;} ((root))&&((UID))&&echo -e "\n\e[1;31m (!) Use sudo $0\e[m\n"&&exit _stable_2635() { [[ -e compat-wireless-2.6.35-rc6.tar.bz2 ]] && rm compat-wireless-2.6.35-rc6.tar.bz2 [[ -d compat-wireless-2.6.35-rc6 ]] && rm compat-wireless-2.6.35-rc6 wget http://www.orbit-lab.org/kernel/compat-wireless-2.6-stable/v2.6.35/compat-wireless-2.6.35-rc6.tar.bz2 && tar -xvjf compat-wireless-2.6.35-rc6.tar.bz2 > /dev/null && rm compat-wireless-2.6.35-rc6.tar.bz2 && cd ./compat-wireless-2.6.35-rc6 } _svn() { [[ -e compat-wireless-2.6.tar.bz2 ]] && rm compat-wireless-2.6.tar.bz2 [[ -d compat-wireless-2011* ]] && rm compat-wireless-2011* wget http://www.orbit-lab.org/kernel/compat-wireless-2.6/compat-wireless-2.6.tar.bz2 && tar -xvjf compat-wireless-2.6.tar.bz2 > /dev/null && rm compat-wireless-2.6.tar.bz2 && cd ./compat-wireless-2011* } _drivers() { echo -e "\n\e[1;32mDrivers:\n\e[m2.6.35/\e[33msvn\e[m\n------- adm8211 libertas rt2400pci \e[33mar9170usb\e[m libertas_cs rt2500pci \e[33mat76c50x-usb\e[m \e[33mlibertas_sdio\e[m rt2500usb ath5k \e[33mlibertas_spi\e[m \e[33mrt2800pci\e[m \e[33math6kl\e[m \e[33mlibertas_tf\e[m \e[33mrt2800usb\e[m ath9k \e[33mlibertas_tf_usb\e[m rt61pci \e[33math9k_htc\e[m \e[33mlibipw\e[m rt73usb b43 \e[33morinoco_cs\e[m rtl8180 b43legacy \e[33morinoco_nortel \e[m rtl8187 \e[33mb44\e[m \e[33morinoco_pci\e[m \e[33mrtlwifi\e[m carl9170 \e[33morinoco_plx\e[m \e[33mrtl8192ce\e[m \e[33mbrcm80211\e[m \e[33morinoco_tld\e[m \e[33mspectrum_cs\e[m ipw2100 \e[33morinoco_usb\e[m \e[33mssb\e[m ipw2200 \e[33morinoco\e[m \e[33mwl1251\e[m iwl3945 \e[33mp54common\e[m \e[33mwl12xx\e[m iwlagn p54pci zd1211rw \e[33miwlcore\e[m \e[33mp54spi\e[m \e[33miwmc3200wifi\e[m p54usb\n" } _bip() { [[ $(dpkg-query -l vlc-nox) ]] && { sudo -u \#1000 cvlc /pentest/wireless/kismet-newcore/wav/gpslost.wav vlc://quit 2</dev/null;} } _installer() { $choice wget http://patches.aircrack-ng.org/zd1211rw-inject+dbi-fix-2.6.26.patch && wget http://patches.aircrack-ng.org/channel-negative-one-maxim.patch && wget http://patches.aircrack-ng.org/mac80211.compat08082009.wl_frag+ack_v1.patch && wget http://patches.aircrack-ng.org/mac80211_2.6.32.2-wl_frag+ack_radiotap.patch && patch -Np0 < zd1211rw-inject+dbi-fix-2.6.26.patch patch -Np1 < mac80211_2.6.32.2-wl_frag+ack_radiotap.patch patch -Np1 < mac80211.compat08082009.wl_frag+ack_v1.patch patch -Np1 < channel-negative-one-maxim.patch make && make install && sudo make wlunload && echo -e '\n\e[1;32m Run: sudo modprobe <driver> \e[m\n'; _bip || echo -e '\n\e[1;31m (!) Unknown installation error\e[m\n'; _bip; _bip } _help(){ echo -e " \e[1;34mCompat-wireless installer\e[m _________________________________ Usage: $0 [options] Options: -a : Installs CompatW 2.6.35 -s : Installs CompatW SVN -d : Show supported drivers " ;} while getopts "asd" execute; do case ${execute} in a ) choice=_stable_2635 ; _installer; exit ;; s ) choice=_svn; _installer; exit ;; d ) _drivers; exit ;; esac done _help

for install wifi
Thanks

[yaswanthraj]

Thanks v much for ur reply...well..

[/b]
lspci | grep Network
05:00.0 Network controller: Broadcom Corporation Device 4727 (rev 01)



Ifconfig

o/p:

eth0 Link encap:Ethernet HWaddr 70:5a:b6:5e:a6:f5
inet addr:172.16.17.56 Bcast:172.16.17.255 Mask:255.255.255.0
inet6 addr: fe80::725a:b6ff:fe5e:a6f5/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:26249 errors:0 dropped:0 overruns:0 frame:0
TX packets:12519 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:22216597 (22.2 MB) TX bytes:1675351 (1.6 MB)
Interrupt:33 Base address:0xe000

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:116 errors:0 dropped:0 overruns:0 frame:0
TX packets:116 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:5800 (5.8 KB) TX bytes:5800 (5.8 KB)

iwconfig
lo no wireless extensions.

eth0 no wireless extensions.

Tried ur script...saved it as see.sh

Now..

sudo sh see.sh -s


At the end..I got this

/home/royalraj/compat-wireless-2011-04-19/drivers/net/atl1c/atl1c_main.c: In function ‘atl1c_change_mtu’:
/home/royalraj/compat-wireless-2011-04-19/drivers/net/atl1c/atl1c_main.c:527: error: implicit declaration of function ‘netdev_update_features’
/home/royalraj/compat-wireless-2011-04-19/drivers/net/atl1c/atl1c_main.c: At top level:
/home/royalraj/compat-wireless-2011-04-19/drivers/net/atl1c/atl1c_main.c:2593: error: unknown field ‘ndo_fix_features’ specified in initializer
/home/royalraj/compat-wireless-2011-04-19/drivers/net/atl1c/atl1c_main.c:2593: warning: initialization from incompatible pointer type
/home/royalraj/compat-wireless-2011-04-19/drivers/net/atl1c/atl1c_main.c: In function ‘atl1c_init_netdev’:
/home/royalraj/compat-wireless-2011-04-19/drivers/net/atl1c/atl1c_main.c:2614: error: ‘struct net_device’ has no member named ‘hw_features’
/home/royalraj/compat-wireless-2011-04-19/drivers/net/atl1c/atl1c_main.c:2619: error: ‘struct net_device’ has no member named ‘hw_features’
make[4]: *** [/home/royalraj/compat-wireless-2011-04-19/drivers/net/atl1c/atl1c_main.o] Error 1
make[3]: *** [/home/royalraj/compat-wireless-2011-04-19/drivers/net/atl1c] Error 2
make[2]: *** [/home/royalraj/compat-wireless-2011-04-19/drivers/net] Error 2
make[1]: *** [_module_/home/royalraj/compat-wireless-2011-04-19] Error 2
make[1]: Leaving directory `/usr/src/linux-source-2.6.30.9'
make: *** [modules] Error 2
No packages found matching vlc-nox.

(!) Unknown installation error

No packages found matching vlc-nox.
No packages found matching vlc-nox.

Now wht shld i say???

[1llusion]

did you try the compat wireless package? What chipset does your WiFi use? BackTrack 4 doesn't support N adapters yet, back track 5 should, so if you can wait less then month until its out

[Enc0de]

Hey there I am trying my Ass off to make BT4 2 detect wireless card...But in Vain !!

My Wireless card:

Broadcam 802.11n

I tried
http://www.backtrack-linux.org/forums/ba...track.html

But none worked...
Am kind a getting this

WARNING: Symbol version dump /usr/src/linux-source-2.6.39.0

Problem

I am newbie in BT..plz help me out!!!! Guide me plzz

WARNING: Symbol version dump /usr/src/linux-source-2.6.39.0

if that shows its fine as long as its installing and if it won't install run the commands and post a picture with the error your getting.

[yaswanthraj]

This is what people with same problem has to do!

uname -a

Check that kernel version..If it is less than 2.6.35.8 then..ur good to go because..
ur problem will be solved right now!

That kernel version detects N - series....

To update kernal version follow this official guide..
http://www.backtrack-linux.org/wiki/index.php/Upgrading

That must do all well...

I got no problem in that and now my wireless is detected...
Thanx to all for ur contributions...thank u

[dhack92]

Idk if this will help ur situation but u could use virtualbox and use ur host's network card it worked just now for me with out messing with settings, i just turned off nat and went briged. sorry if this isnt possible for you not trying to waste time just inputting how i resolved my personal issue with this problem

[yaswanthraj]

Well!!
The problem I got using VMWARE or VIRTUALBOX is that...My network is not identified with that!
I mean...I used NAT to access to WWW....
Now if I sniff the network...Their private IP's (virtual ones) get sniffed...and I cant use BT for my network!
That is why I installed on my lappy and gave it a try...

[dhack92]

Well!!
The problem I got using VMWARE or VIRTUALBOX is that...My network is not identified with that!
I mean...I used NAT to access to WWW....
Now if I sniff the network...Their private IP's (virtual ones) get sniffed...and I cant use BT for my network!
That is why I installed on my lappy and gave it a try...

did you try to bridge it? my understanding NAT puts it in a virtual "router type" of deal with new private ips but if u use bridge mode it should copy ur actual card and use ur ip and see other ips on the network?

[*The ALLSTAR*]

I don't get it why the people go for Backtrack first when they even do not have basic knowledge on nix(linux/unix) platform. Learn the basic first on how to operate linux then go for Backtrack!