[Darkbyte]

Alright guys im releasing this as the watch is ugly a.f and I could not really find a buyer for them. This is my own method/script so enjoy.

Product:
https://www.atlaswearables.com/wristband2/

1. Download python 2.7 if you have not already from
https://www.python.org/downloads/release/python-2712/

2. Download the atlas app off the google play store ( I only tested this on android but it should work on both).
https://play.google.com/store/apps/detai...onic&hl=en

3. Create a account on the app.

4.Download this script https://www.sendspace.com/file/63fhr8 , right click atlas.py and press edit in idle. (Edit in idle will only show after install python)

hedata = {"username" : "USERNAME / EMAIL HERE",
          "password": "PASSWORD HERE",
          "api_sid" : "R8ZklrHfkWh9FINB",
          "api_secret" : "a4PNPPG4oGarWJNgxUshpu19vCp4dYEOSSXx"}
html = acc.post(theurl,thedata)
jsonshit = json.loads(html)
token = jsonshit["token"]

5. Now we need to enter a serial number  in this part:

thedata = {"auth_token" : token,
          "serial_no": "00-014768",

The serial numbers are very easy for this device they are

00-01##### , so you can litrally just add 1 to a existing serial or add any random number to the serial.

Finally run the script. You should see this:



This means it worked! Now close and reopen the app on your android device. Click the profile button on the top right hand side of the app and then press your profile picture.

You should see this:



Good we can see we now have a device setup. This makes shit simple. Send Atlas a email  support@atlaswearables.com and say your shits broken. Any excuse will work to be honest. I usually just say its not turning on. They may trouble shoot but they wont ask for much.