How to hack Wifi - Printable Version +- Sinisterly (https://sinister.li) +-- Forum: Hacking (https://sinister.li/Forum-Hacking) +--- Forum: Tutorials (https://sinister.li/Forum-Tutorials) +--- Thread: How to hack Wifi (/Thread-How-to-hack-Wifi)

How to hack Wifi - doct0r.exe - 09-03-2011 CommView WEP recovery key Aircrack-NG 1 : Install CommView 2 : After installing Commview, paste the “cv.exe” to the install directory (c:program files\commviewwifi) 3 : Then let it install the driver on its own after detecting your card. you should have 1 card that is connected with commview. 4 : elect “enable advanced rules” in rules menu. Write “tods=1 and dmac=FF:FF:FF:FF:FF:FF” in the box with name formula. then click add/edit after naming it. 5 : Go to settings>options>memory usage and choose max buffer packets to 20000 (max). Except the first one named as “capture data packets” uncheck all the other check-bars on the main bar of CommView. 6 : After the above setting, start scanning for the network. If you found your required network, click on the capture button after selecting your desired network. Spoiler: 7 : By utilizing your spare adapter, try to connect with password protected network. if asked for key, type anything randomly,like 987654321 or kjgfgdlfgk. 8 : It probably shows the limited connectivity sign. Come back to commview menu there should be a couple of packets in packets tab. 9 : You should see some packets named as IP/UDP, ARP REQ, and a couple of others, On the protocol column. Right click “ARP REQ” select “send packet”. A small bar should now appear. Change packets per second to 2000 and send it. 10 : Now get back to commview and uncheck the rule you made earlier, in “Rules” menu. 11 : You can see the number of packets rising quickly. By clicking save button in the “File” menu, You must save every 20000 packets. Try to save it as a “dump” .cap file, instead of saving as an ncf file. 12 : Now Extract Aircrack-NG. Open aircrack-ng-GUI which is in the map “bin” and click launch after selecting the files you saved previously. 13 : From the list of IV’s, pick the target you want to hack. Spoiler: 14 : And Finally You are now connected with Wi-Fi of your neighbor. Send him a thank you gift for good luck =) Thanks You! for reading! if you like it please Rep+ ☆┌─┐　─┐☆ 　│▒│ /â–’/ 　│▒│/â–’/ 　│▒ /â–’/─┬─┐ 　│▒│▒|▒│▒│ ┌┴─┴─┐-┘─┘ │▒┌──┘▒▒▒│ └┐▒▒▒▒▒▒┌┘ 　└┐▒▒▒▒┌┘ How to hack Wifi - doct0r.exe - 09-03-2011 CommView WEP recovery key Aircrack-NG 1 : Install CommView 2 : After installing Commview, paste the “cv.exe” to the install directory (c:program files\commviewwifi) 3 : Then let it install the driver on its own after detecting your card. you should have 1 card that is connected with commview. 4 : elect “enable advanced rules” in rules menu. Write “tods=1 and dmac=FF:FF:FF:FF:FF:FF” in the box with name formula. then click add/edit after naming it. 5 : Go to settings>options>memory usage and choose max buffer packets to 20000 (max). Except the first one named as “capture data packets” uncheck all the other check-bars on the main bar of CommView. 6 : After the above setting, start scanning for the network. If you found your required network, click on the capture button after selecting your desired network. Spoiler: 7 : By utilizing your spare adapter, try to connect with password protected network. if asked for key, type anything randomly,like 987654321 or kjgfgdlfgk. 8 : It probably shows the limited connectivity sign. Come back to commview menu there should be a couple of packets in packets tab. 9 : You should see some packets named as IP/UDP, ARP REQ, and a couple of others, On the protocol column. Right click “ARP REQ” select “send packet”. A small bar should now appear. Change packets per second to 2000 and send it. 10 : Now get back to commview and uncheck the rule you made earlier, in “Rules” menu. 11 : You can see the number of packets rising quickly. By clicking save button in the “File” menu, You must save every 20000 packets. Try to save it as a “dump” .cap file, instead of saving as an ncf file. 12 : Now Extract Aircrack-NG. Open aircrack-ng-GUI which is in the map “bin” and click launch after selecting the files you saved previously. 13 : From the list of IV’s, pick the target you want to hack. Spoiler: 14 : And Finally You are now connected with Wi-Fi of your neighbor. Send him a thank you gift for good luck =) Thanks You! for reading! if you like it please Rep+ ☆┌─┐　─┐☆ 　│▒│ /â–’/ 　│▒│/â–’/ 　│▒ /â–’/─┬─┐ 　│▒│▒|▒│▒│ ┌┴─┴─┐-┘─┘ │▒┌──┘▒▒▒│ └┐▒▒▒▒▒▒┌┘ 　└┐▒▒▒▒┌┘ RE: • » нσω тσ нα¢к Ïà - narc0tics - 09-03-2011 The pictures doesn't seem to work. Can you re-upload them? RE: • » нσω тσ нα¢к Ïà - narc0tics - 09-03-2011 The pictures doesn't seem to work. Can you re-upload them? RE: • » нσω тσ нα¢к Ïà - Ragecry - 09-03-2011 Ummm what os is this for? RE: • » нσω тσ нα¢к Ïà - Ragecry - 09-03-2011 Ummm what os is this for? RE: • » нσω тσ нα¢к Ïà - doct0r.exe - 09-03-2011 The Pics seems to work fine mate and this is for Windows RE: • » нσω тσ нα¢к Ïà - doct0r.exe - 09-03-2011 The Pics seems to work fine mate and this is for Windows