+- Sinisterly (https://sinister.li)
+-- Forum: Computers (https://sinister.li/Forum-Computers)
+--- Forum: Operating Systems (https://sinister.li/Forum-Operating-Systems)
+--- Thread: How to hack through the Home Network? (/Thread-How-to-hack-through-the-Home-Network)
RE: Accessing another Pc through the Home Network? - IpLayer - 10-31-2013
Metasploit Framework Console
Code:
"Call trans opt: received. 2-19-98 13:24:18 REC:Loc
Trace program: running
http://metasploit.pro
=[ metasploit v4.7.2-1 [core:4.7 api:1.0]
+ -- --=[ 1211 exploits - 733 auxiliary - 202 post
+ -- --=[ 317 payloads - 30 encoders - 8 nops
msf >
msf > db_connect postgres:------------@localhost :5432
msf > db_host
[-] Unknown command: db_host.
msf > db_nmap 192.168.1.2
[*] Nmap: Starting Nmap 6.40 ( http://nmap.org ) at 2013-10-31 22:01 Daylight Time
[*] Nmap: Nmap scan report for Ghazal-PC.Home (192.168.1.2)
[*] Nmap: Host is up (0.0040s latency).
[*] Nmap: All 1000 scanned ports on Ghazal-PC.Home (192.168.1.2) are filtered
[*] Nmap: MAC Address: 02:08:E8:36:E7:C0 (Unknown)
[*] Nmap: Nmap done: 1 IP address (1 host up) scanned in 28.59 seconds
msf > db_autopwn -t -p -e -s -b
[-] The db_autopwn command is DEPRECATED
[-] See http://r-7.co/xY65Zr insteadRE: Accessing another Pc through the Home Network? - IpLayer - 11-01-2013
Hi, I run the commands like here http://www.hackcommunity.com/Thread-How-To-Hack-A-Computer-With-Just-A-IP?highlight=metasploit
Why they aren't working,cause it's newer version?!
This is the nmap scan?it's say that there's no way?:Confused:
Thanks.
RE: Accessing another Pc through the Home Network? - IpLayer - 11-01-2013
Hi, I run the commands like here http://www.hackcommunity.com/Thread-How-To-Hack-A-Computer-With-Just-A-IP?highlight=metasploit
Why they aren't working,cause it's newer version?!
This is the nmap scan?it's say that there's no way?:Confused:
Thanks.
RE: Accessing another Pc through the Home Network? - IpLayer - 11-01-2013
Hi,I did another scan,and now there's 2 open Ports..
Code:
[*] Nmap: Nmap scan report for Ghazal-PC.Home (192.168.1.2)
[*] Nmap: Host is up (0.0058s latency).
[*] Nmap: Not shown: 998 filtered ports
[*] Nmap: PORT STATE SERVICE
[*] Nmap: 80/tcp open http
[*] Nmap: 443/tcp open https
[*] Nmap: MAC Address: 02:08:E8:36:E7:C0 (Unknown)
[*] Nmap: Nmap done: 1 IP address (1 host up) scanned in 12.24 secondsThanks.
RE: How to hack through the Home Network? - IpLayer - 11-02-2013
This is the Results of nmap -sV -T4 -A -v -Pn
Code:
[*] exec: nmap -sV -T4 -A -v -Pn 192.168.1.2
Starting Nmap 6.40 ( http://nmap.org ) at 2013-11-02 21:00 Standard Time
NSE: Loaded 110 scripts for scanning.
NSE: Script Pre-scanning.
Initiating ARP Ping Scan at 21:00
Scanning 192.168.1.2 [1 port]
Completed ARP Ping Scan at 21:00, 0.53s elapsed (1 total hosts)
Initiating Parallel DNS resolution of 1 host. at 21:00
Completed Parallel DNS resolution of 1 host. at 21:00, 0.00s elapsed
Initiating SYN Stealth Scan at 21:00
Scanning Ghazal-PC.Home (192.168.1.2) [1000 ports]
Discovered open port 443/tcp on 192.168.1.2
Discovered open port 80/tcp on 192.168.1.2
Completed SYN Stealth Scan at 21:00, 4.90s elapsed (1000 total ports)
Initiating Service scan at 21:00
Scanning 2 services on Ghazal-PC.Home (192.168.1.2)
Service scan Timing: About 50.00% done; ETC: 21:03 (0:01:44 remaining)
Completed Service scan at 21:02, 106.87s elapsed (2 services on 1 host)
Initiating OS detection (try #1) against Ghazal-PC.Home (192.168.1.2)
NSE: Script scanning 192.168.1.2.
Initiating NSE at 21:02
Completed NSE at 21:02, 20.30s elapsed
Nmap scan report for Ghazal-PC.Home (192.168.1.2)
Host is up (0.0069s latency).
Not shown: 998 filtered ports
PORT STATE SERVICE VERSION
80/tcp open http?
|_http-title: Site doesn't have a title.
443/tcp open skype2 Skype
|_http-title: Site doesn't have a title.
1 service unrecognized despite returning data. If you know the service/version,
please submit the following fingerprint at http://www.insecure.org/cgi-bin/servicefp-submit.cgi :
SF-Port80-TCP:V=6.40%I=7%D=11/2%Time=52754BC6%P=i686-pc-windows-windows%r(
SF:GetRequest,1A,"HTTP/1\.0\x20404\x20Not\x20Found\r\n\r\n")%r(HTTPOptions
SF:,3B,"\xc4\x9f\x0boo\xb1I\xf0}\xf7\x10\xb5zIg\xc2\xc4\x86\xf5\xa5\|\x88~
SF:\xda\x166\x05b\xc7\xd7\xdeu\x8d\|d_\xfd\xe2\xc1&\xec\xafW\x89\xba\xf9%I
SF:\xc6\xff\xa4\xc52{\xf0\xa1\^\xb7\xfc")%r(RTSPRequest,5F,"Y\x9c\xc5\xbc\
SF:xf6\xc8\xe60\xeecT\xf8\xd8\x86>\xad\xa2SI\xe4\xd4\(\xbdV\xc2\x8a\xea\xa
SF:0\x88o}l\x9a\x89\x15\xbf\x9d\xf9p\xad\x8bUa\x05k\x9en\xc4\xeb\xa0\x91\x
SF:8e'\xac-z#x\x89&\xdf\x04\xa5\x92\[P\x81\xbe\x97\\\x1d\xaa\x93\(yVO\xb4\
SF:x95\xc2\xcb\0q\xee\x07\x0c\r\xda\x03\xd8i\x86\xbfd\x85")%r(FourOhFourRe
SF:quest,1A,"HTTP/1\.0\x20404\x20Not\x20Found\r\n\r\n")%r(RPCCheck,37,"\xc
SF:8q/\xdc\x16v\xe3\xe3Q\xb5k\xc2\xae\x06\xd3\x08\x0e\x8e-Z\x9fcs\xc3\xc5C
SF:z\xf8\x16\x14\xacNo\xa2\x88~\x1d}4=\xbd\$\xf7\xc9\xa9`NF\xc01\xae\xc7\x
SF:cc\xcd\x9a")%r(DNSVersionBindReq,69,"\x91\x8e~\x02\xa1N\xacn\.I\xe0%\xe
SF:e\x13\xc0\x8c/\xe7B\x83#\x9eS\x8e4\xe8\xf5\xf9\x9fu\xc9\xf6\xb1\[K\xc3\
SF:xc7\xb7~b\x84\xdb\x134c\xae\*\x1ff\x1fD\xe5\xd2\x9b\x90\xc1\xfe\xd7\x9c
SF:\]\xea\xd3h\xb9\x96\x8f\xf4\xd5\x02\x0b@\xb1\.GLM\x1aC\x18\xa9\xc6\xff\
SF:xa4\xc52{\xf0\xa1\^\xb7\xfc=J\xb3\xc8\x99\xf6oT\xb5b\xeb\xa0\x91\x8e")%
SF:r(DNSStatusRequest,30,"m\x15\xe6\xca\x91y>\xe8\xb2n\xe0G\x10\xd5C\xa8\x
SF:9d\xd0\)&\xc8\xc0\xc4\xecn\x13\x83UA\xfb\xc9c\xc92\xb4Tj\+MD\x01\x0ejzE
SF:VV\xdc")%r(SSLSessionReq,43,"\x1b\x8f\$\xe4\xc2\x8e2\xd3\x8b#\xbd\x16\x
SF:86\xb9\xbbA\xbbBc\x8aOh\xc6\x8eC\xf7\xf5\x85\$;\x06M\x89'\x12t\x9e0c0\x
SF:cc\x1a\xea\xdf{G\xfa\xd8\xb8\xc9f\x1fD\xe5\xd2\x9b\x90\xc1\xfe\x8d\xec\
SF:xd6\xd8\x90\xd8\xf4-")%r(Kerberos,6C,"Z\x15\x02\x0f6\xcf\.\$8r\xacs\x01
SF:z\xffE>\xb7SsIuO\xe1\x14\x01\xe2Lk\xc3\xe3Y\$\xf3\xa14uT-\x90\x20\xdaE;
SF:z\xd3e\xc8\xa1\^\xb7\xfc=J\xb3\xc8\x99\xf6oT\xb5b\xeb\xa0\x91\x8e'\xac-
SF:z#x\x89&\xdf\x04\xa5\x92\[P\x81\xbe\x97\\\x1d\xaa\x93\(yVO\xb4\x95\xc2\
SF:xcb\0q\xee\x07\x0c\x1c\xaa\xc96\x94\xad\x9aB")%r(SMBProgNeg,5E,"\x8dz\+
SF:~L\x1c\x0e{\\'\xe3\x1fW\x88\^\$t\xd0\xc7\xd7-6\?\xcd\xfc\xbe\xf2`SX\x8d
SF:wa_\xa0\x18M>\xb6\xa7\xa8q\(r\xbf\xb0\xdac\xd8i\x86\xbfd\x85\xf2;\xb0a\
SF:x1ew\xbc\xfd\ns\x88Y\xb6/\x14u\"\xab`QN\xe7l\xed:\xe38I\xe6\x9f\xc4eR\x
SF:1b\x10A~W\x1c\xdd");
MAC Address: 02:08:E8:36:E7:C0 (Unknown)
Warning: OSScan results may be unreliable because we could not find at least 1 open and 1 closed port
Device type: general purpose
Running: Microsoft Windows 2008|7|Vista
OS CPE: cpe:/o:microsoft:windows_server_2008::beta3 cpe:/o:microsoft:windows_7::-:professional cpe:/o:microsoft:windows_vista::- cpe:/o:microsoft:windows_vista::sp1
OS details: Microsoft Windows Server 2008 Beta 3, Microsoft Windows 7 Professional, Microsoft Windows Vista SP0 or SP1, Windows Server 2008 SP1, or Windows 7, Microsoft Windows Vista SP2, Windows 7 SP1, or Windows Server 2008
Uptime guess: 0.544 days (since Sat Nov 02 07:58:25 2013)
Network Distance: 1 hop
TCP Sequence Prediction: Difficulty=256 (Good luck!)
IP ID Sequence Generation: Incremental
TRACEROUTE
HOP RTT ADDRESS
1 6.87 ms Ghazal-PC.Home (192.168.1.2)
NSE: Script Post-scanning.
Read data files from: D:\metasploit\nmap
OS and Service detection performed. Please report any incorrect results at http://nmap.org/submit/ .
Nmap done: 1 IP address (1 host up) scanned in 143.88 seconds
Raw packets sent: 2044 (92.488KB) | Rcvd: 16 (780B):Slant: anyidea?
RE: How to hack through the Home Network? - IpLayer - 11-05-2013
I've Tried another Host with metasploit 4.7 and db_autopwn -t -p -e -s -b Command,
with all this open Ports:
Code:
msf > db_nmap 192.168.1.101
[*] Nmap: Starting Nmap 6.40 ( http://nmap.org ) at 2013-11-05 11:19 Standard Time
[*] Nmap: Warning: 192.168.1.101 giving up on port because retransmission cap hit (10).
[*] Nmap: Nmap scan report for 192.168.1.101
[*] Nmap: Host is up (0.0034s latency).
[*] Nmap: Not shown: 978 closed ports
[*] Nmap: PORT STATE SERVICE
[*] Nmap: 7/tcp open echo
[*] Nmap: 9/tcp open discard
[*] Nmap: 13/tcp open daytime
[*] Nmap: 17/tcp open qotd
[*] Nmap: 19/tcp open chargen
[*] Nmap: 80/tcp open http
[*] Nmap: 135/tcp open msrpc
[*] Nmap: 139/tcp open netbios-ssn
[*] Nmap: 445/tcp open microsoft-ds
[*] Nmap: 554/tcp open rtsp
[*] Nmap: 1110/tcp filtered nfsd-status
[*] Nmap: 2869/tcp open icslap
[*] Nmap: 5357/tcp open wsdapi
[*] Nmap: 10243/tcp open unknown
[*] Nmap: 12000/tcp open cce4x
[*] Nmap: 49152/tcp open unknown
[*] Nmap: 49153/tcp open unknown
[*] Nmap: 49154/tcp open unknown
[*] Nmap: 49155/tcp open unknown
[*] Nmap: 49158/tcp open unknown
[*] Nmap: 49159/tcp open unknown
[*] Nmap: 49160/tcp open unknown
[*] Nmap: MAC Address: 00:24:D6:58:D7:D4 (Intel Corporate)
[*] Nmap: Nmap done: 1 IP address (1 host up) scanned in 313.67 secondswith this [*] The autopwn command has completed with 0 sessions:Confused: Is it Ever Work?
RE: How to hack through the Home Network? - IpLayer - 11-07-2013
Please can anyone Provide me with Working Method using Windows Or kali?
Not like dummy things i find on youtube ,that the Victim should type my IP or link i did ,or even giving Permission to something obviously looks malicious : 'Hey hacker how i can help you to hack my Pc'
:Cry: Would you?
Im gonna try this ,it might work?
http://www.youtube.com/watch?v=zgiKkf20jwI
In this tutorial we need the victim to Use IE ,..
but the Nmap scan didn't show anything imprtant,like you see in Post 16,is it?..
How to gather more Information?