Hacking outside LAN - Printable Version

Hacking outside LAN - Printable Version

+- Sinisterly (https://sinister.li)
+-- Forum: Hacking (https://sinister.li/Forum-Hacking)
+--- Forum: Tutorials (https://sinister.li/Forum-Tutorials)
+---- Forum: Requests (https://sinister.li/Forum-Requests--826)
+---- Thread: Hacking outside LAN (/Thread-Hacking-outside-LAN)

Pages: 1 2 3 4

RE: Hacking outside LAN - Ex094 - 05-16-2013

(05-16-2013, 07:23 AM)ShadowVarane Wrote:
(05-15-2013, 12:40 PM)Ex094 Wrote:
(05-15-2013, 11:52 AM)ShadowVarane Wrote:
(05-15-2013, 07:48 AM)Ex094 Wrote: First of all you did not mention what KIND of method are your trying to use? Either it's SET or another one.

Yes, using SET in backtrack~

If you want to use SET out side your LAN then when SET asks you to input the IP of the server, put your original one there (Get it from whatismyipaddress.com)
And also don't forget to forward Port 80!
but when i do all this after i key in my ip when set ask me... after i type in my cloning website which is www.facebook.com ... but there cloning process doesn't end.. it take too long.. but when i do without por forwarding it works??? whyyy

Are you using a router?

RE: Hacking outside LAN - ShadowVarane - 05-16-2013

(05-16-2013, 07:30 AM)Ex094 Wrote:
(05-16-2013, 07:23 AM)ShadowVarane Wrote:
(05-15-2013, 12:40 PM)Ex094 Wrote:
(05-15-2013, 11:52 AM)ShadowVarane Wrote:
(05-15-2013, 07:48 AM)Ex094 Wrote: First of all you did not mention what KIND of method are your trying to use? Either it's SET or another one.

Yes, using SET in backtrack~

If you want to use SET out side your LAN then when SET asks you to input the IP of the server, put your original one there (Get it from whatismyipaddress.com)
And also don't forget to forward Port 80!
but when i do all this after i key in my ip when set ask me... after i type in my cloning website which is www.facebook.com ... but there cloning process doesn't end.. it take too long.. but when i do without por forwarding it works??? whyyy

Are you using a router?

yes bro.. the same one like yours. The one u used for How to port forward post

RE: Hacking outside LAN - ShadowVarane - 05-16-2013

(05-16-2013, 07:30 AM)Ex094 Wrote:
(05-16-2013, 07:23 AM)ShadowVarane Wrote:
(05-15-2013, 12:40 PM)Ex094 Wrote:
(05-15-2013, 11:52 AM)ShadowVarane Wrote:
(05-15-2013, 07:48 AM)Ex094 Wrote: First of all you did not mention what KIND of method are your trying to use? Either it's SET or another one.

Yes, using SET in backtrack~

If you want to use SET out side your LAN then when SET asks you to input the IP of the server, put your original one there (Get it from whatismyipaddress.com)
And also don't forget to forward Port 80!
but when i do all this after i key in my ip when set ask me... after i type in my cloning website which is www.facebook.com ... but there cloning process doesn't end.. it take too long.. but when i do without por forwarding it works??? whyyy

Are you using a router?

yes bro.. the same one like yours. The one u used for How to port forward post

RE: Hacking outside LAN - ShadowVarane - 05-16-2013

(05-16-2013, 07:30 AM)Ex094 Wrote:
(05-16-2013, 07:23 AM)ShadowVarane Wrote:
(05-15-2013, 12:40 PM)Ex094 Wrote:
(05-15-2013, 11:52 AM)ShadowVarane Wrote:
(05-15-2013, 07:48 AM)Ex094 Wrote: First of all you did not mention what KIND of method are your trying to use? Either it's SET or another one.

Yes, using SET in backtrack~

If you want to use SET out side your LAN then when SET asks you to input the IP of the server, put your original one there (Get it from whatismyipaddress.com)
And also don't forget to forward Port 80!
but when i do all this after i key in my ip when set ask me... after i type in my cloning website which is www.facebook.com ... but there cloning process doesn't end.. it take too long.. but when i do without por forwarding it works??? whyyy

Are you using a router?

yes bro.. the same one like yours. The one u used for How to port forward post

RE: Hacking outside LAN - Ex094 - 05-16-2013

(05-16-2013, 07:57 AM)ShadowVarane Wrote:
(05-16-2013, 07:30 AM)Ex094 Wrote:
(05-16-2013, 07:23 AM)ShadowVarane Wrote:
(05-15-2013, 12:40 PM)Ex094 Wrote:
(05-15-2013, 11:52 AM)ShadowVarane Wrote: Yes, using SET in backtrack~

If you want to use SET out side your LAN then when SET asks you to input the IP of the server, put your original one there (Get it from whatismyipaddress.com)
And also don't forget to forward Port 80!
but when i do all this after i key in my ip when set ask me... after i type in my cloning website which is www.facebook.com ... but there cloning process doesn't end.. it take too long.. but when i do without por forwarding it works??? whyyy

Are you using a router?
yes bro.. the same one like yours. The one u used for How to port forward post

Here is what you have to do:

1) Suppose my LAN IP is 192.168.0.110
2) When SET asks for Server IP, input the LAN IP ^
3) Goto your router setup and to the Port Forwarding section
4) Port Forward port 80 on your Server IP that is (192.168.0.110)

Now, goto whatismyipaddress.com and get your real IP, Go to that IP and you'll see your fake page for sure!

RE: Hacking outside LAN - Ex094 - 05-16-2013

(05-16-2013, 07:57 AM)ShadowVarane Wrote:
(05-16-2013, 07:30 AM)Ex094 Wrote:
(05-16-2013, 07:23 AM)ShadowVarane Wrote:
(05-15-2013, 12:40 PM)Ex094 Wrote:
(05-15-2013, 11:52 AM)ShadowVarane Wrote: Yes, using SET in backtrack~

If you want to use SET out side your LAN then when SET asks you to input the IP of the server, put your original one there (Get it from whatismyipaddress.com)
And also don't forget to forward Port 80!
but when i do all this after i key in my ip when set ask me... after i type in my cloning website which is www.facebook.com ... but there cloning process doesn't end.. it take too long.. but when i do without por forwarding it works??? whyyy

Are you using a router?
yes bro.. the same one like yours. The one u used for How to port forward post

RE: Hacking outside LAN - ShadowVarane - 05-16-2013

(05-16-2013, 08:05 AM)Ex094 Wrote:
(05-16-2013, 07:57 AM)ShadowVarane Wrote:
(05-16-2013, 07:30 AM)Ex094 Wrote:
(05-16-2013, 07:23 AM)ShadowVarane Wrote:
(05-15-2013, 12:40 PM)Ex094 Wrote: If you want to use SET out side your LAN then when SET asks you to input the IP of the server, put your original one there (Get it from whatismyipaddress.com)
And also don't forget to forward Port 80!
but when i do all this after i key in my ip when set ask me... after i type in my cloning website which is www.facebook.com ... but there cloning process doesn't end.. it take too long.. but when i do without por forwarding it works??? whyyy

Are you using a router?
yes bro.. the same one like yours. The one u used for How to port forward post

Here is what you have to do:

1) Suppose my LAN IP is 192.168.0.110
2) When SET asks for Server IP, input the LAN IP ^
3) Goto your router setup and to the Port Forwarding section
4) Port Forward port 80 on your Server IP that is (192.168.0.110)

Now, goto whatismyipaddress.com and get your real IP, Go to that IP and you'll see your fake page for sure!

i've done the same but its still not working. cloning takes too long and nvr end.. i think i gonna reinstall my SET

RE: Hacking outside LAN - ShadowVarane - 05-16-2013

(05-16-2013, 08:05 AM)Ex094 Wrote:
(05-16-2013, 07:57 AM)ShadowVarane Wrote:
(05-16-2013, 07:30 AM)Ex094 Wrote:
(05-16-2013, 07:23 AM)ShadowVarane Wrote:
(05-15-2013, 12:40 PM)Ex094 Wrote: If you want to use SET out side your LAN then when SET asks you to input the IP of the server, put your original one there (Get it from whatismyipaddress.com)
And also don't forget to forward Port 80!
but when i do all this after i key in my ip when set ask me... after i type in my cloning website which is www.facebook.com ... but there cloning process doesn't end.. it take too long.. but when i do without por forwarding it works??? whyyy

Are you using a router?
yes bro.. the same one like yours. The one u used for How to port forward post

Here is what you have to do:

1) Suppose my LAN IP is 192.168.0.110
2) When SET asks for Server IP, input the LAN IP ^
3) Goto your router setup and to the Port Forwarding section
4) Port Forward port 80 on your Server IP that is (192.168.0.110)

Now, goto whatismyipaddress.com and get your real IP, Go to that IP and you'll see your fake page for sure!

i've done the same but its still not working. cloning takes too long and nvr end.. i think i gonna reinstall my SET

RE: Hacking outside LAN - Ex094 - 05-16-2013

@ShadowVarane Hmmm, Judging from that SET Freezing, It's seems it might be a problem with your version. If you are using Kali then you'll face bugs