Sinisterly
FTID gone wrong, How can I Improve. +Public Service Annoucement. - Printable Version

+- Sinisterly (https://sinister.li)
+-- Forum: Hacking (https://sinister.li/Forum-Hacking)
+--- Forum: Social Engineering (https://sinister.li/Forum-Social-Engineering)
+--- Thread: FTID gone wrong, How can I Improve. +Public Service Annoucement. (/Thread-FTID-gone-wrong-How-can-I-Improve-Public-Service-Annoucement)

Pages: 1 2

FTID gone wrong, How can I Improve. +Public Service Annoucement. - Ellsyian - 12-04-2023

UPS UK for reference. I was using the S/N method and even had to send in a video, which I did, everything was going great until I got this message:
"We've confirmed with the carrier that this shipment was flagged as a fraud risk. This can occur if the carrier identifies modifications to the label or other attempts to tamper with the package. We are unable to process a refund or provide a replacement. Ticket close. You cannot reply."

For this I used a very popular boxing service on Nulled - MrsIntegra - don't use them, utter morons

I'm not sure what caused this to fail. I understand that for UK, UPS has an identifier like GBR ### #-## - this is limited to a small geographic area - commander fucknugget above had the ftid destination more than 150 miles outside of that zone. It could also be that address has been used more than a hooker on black Friday.

This is what I have when I plug in the tracking number:

Your shipment
Removed for privacy
  Delivered On
Day of the Week, Month, ## in month at 14:14 at Dock

Returned To
BILSTON GB

Received By:
JON
Proof of Delivery

So what do I do? I had 2 ideas - Involving regenerating the scanning barcode that contains the address to a different nearby address and text editing the "Ship to" information to 1 of the 2 below

(1)Find a business that accepts envelopes - Will the ftid fail If I put the label on an envelope instead of a package - envelope is obviously easier to get accepted but if that lowers the success rate I have no problem with an actual box.

(2)Try to get the real name and address of someone that lives in the nearby area and address it to them.

I don't know how to do number 1 - perhaps just find a warehouse or factory in the area. Number 2 will be a pain in the ass.

I'd really appreciate any and all advice on this. Don't assume I know anything.

RE: FTID gone wrong, How can I Improve. +Public Service Annoucement. - bumbuls6 - 12-04-2023

FTID is bad to even begin with

RE: FTID gone wrong, How can I Improve. +Public Service Annoucement. - Ellsyian - 12-04-2023

(12-04-2023, 09:37 PM)bumbuls6 Wrote: FTID is bad  to even begin with

I've been hearing that but what other methods am I meant to go with? I've cooked a bit much for comfort on AZ. I'm currently reading my way through "Bobs Refunding Ebook V5" Because I might learn something but I think it may be a few years out of date.

RE: FTID gone wrong, How can I Improve. +Public Service Annoucement. - Akari0967 - 12-05-2023

(12-04-2023, 09:46 PM)Ellsyian Wrote:
(12-04-2023, 09:37 PM)bumbuls6 Wrote: FTID is bad  to even begin with

I've been hearing that but what other methods am I meant to go with? I've cooked a bit much for comfort on AZ. I'm currently reading my way through "Bobs Refunding Ebook V5" Because I might learn something but I think it may be a few years out of date.

You could use dry ice or dissapearing ink. But i still think the best way is to just call the company and keep complaining till you get a refund lmao

RE: FTID gone wrong, How can I Improve. +Public Service Annoucement. - bumbuls6 - 12-05-2023

dry ice method should work if you deliver to the post office where the package is weighed. disappearing ink is outdated - raises suspicion and simply does not work anymore

RE: FTID gone wrong, How can I Improve. +Public Service Annoucement. - Ellsyian - 12-07-2023

(12-05-2023, 03:15 PM)bumbuls6 Wrote: dry ice method should work if you deliver to the post office where the package is weighed. disappearing ink is outdated - raises suspicion and simply does not work anymore

Isn't dry ice just going to melt and cause mega suspicion in the warehouse? Like I could wrap it in some insulation to delay the inevitable or am I meant to keep it in a plastic container it cant leak from?

RE: FTID gone wrong, How can I Improve. +Public Service Annoucement. - defected11 - 12-07-2023

(12-04-2023, 09:20 PM)Ellsyian Wrote: UPS UK for reference. I was using the S/N method and even had to send in a video, which I did, everything was going great until I got this message:
"We've confirmed with the carrier that this shipment was flagged as a fraud risk. This can occur if the carrier identifies modifications to the label or other attempts to tamper with the package. We are unable to process a refund or provide a replacement. Ticket close. You cannot reply."

For this I used a very popular boxing service on Nulled - MrsIntegra - don't use them, utter morons

I'm not sure what caused this to fail. I understand that for UK, UPS has an identifier like GBR ### #-## - this is limited to a small geographic area - commander fucknugget above had the ftid destination more than 150 miles outside of that zone. It could also be that address has been used more than a hooker on black Friday.

This is what I have when I plug in the tracking number:

Your shipment
Removed for privacy
  Delivered On
Day of the Week, Month, ## in month at 14:14 at Dock

Returned To
BILSTON GB

Received By:
JON
Proof of Delivery

So what do I do? I had 2 ideas - Involving regenerating the scanning barcode that contains the address to a different nearby address and text editing the "Ship to" information to 1 of the 2 below

(1)Find a business that accepts envelopes - Will the ftid fail If I put the label on an envelope instead of a package - envelope is obviously easier to get accepted but if that lowers the success rate I have no problem with an actual box.

(2)Try to get the real name and address of someone that lives in the nearby area and address it to them.

I don't know how to do number 1 - perhaps just find a warehouse or factory in the area. Number 2 will be a pain in the ass.

I'd really appreciate any and all advice on this. Don't assume I know anything.

was about to use mrsintegra

RE: FTID gone wrong, How can I Improve. +Public Service Annoucement. - Ellsyian - 12-07-2023

(12-07-2023, 12:54 AM)defected11 Wrote:
(12-04-2023, 09:20 PM)Ellsyian Wrote: UPS UK for reference. I was using the S/N method and even had to send in a video, which I did, everything was going great until I got this message:
"We've confirmed with the carrier that this shipment was flagged as a fraud risk. This can occur if the carrier identifies modifications to the label or other attempts to tamper with the package. We are unable to process a refund or provide a replacement. Ticket close. You cannot reply."

For this I used a very popular boxing service on Nulled - MrsIntegra - don't use them, utter morons

I'm not sure what caused this to fail. I understand that for UK, UPS has an identifier like GBR ### #-## - this is limited to a small geographic area - commander fucknugget above had the ftid destination more than 150 miles outside of that zone. It could also be that address has been used more than a hooker on black Friday.

This is what I have when I plug in the tracking number:

Your shipment
Removed for privacy
  Delivered On
Day of the Week, Month, ## in month at 14:14 at Dock

Returned To
BILSTON GB

Received By:
JON
Proof of Delivery

So what do I do? I had 2 ideas - Involving regenerating the scanning barcode that contains the address to a different nearby address and text editing the "Ship to" information to 1 of the 2 below

(1)Find a business that accepts envelopes - Will the ftid fail If I put the label on an envelope instead of a package - envelope is obviously easier to get accepted but if that lowers the success rate I have no problem with an actual box.

(2)Try to get the real name and address of someone that lives in the nearby area and address it to them.

I don't know how to do number 1 - perhaps just find a warehouse or factory in the area. Number 2 will be a pain in the ass.

I'd really appreciate any and all advice on this. Don't assume I know anything.

was about to use mrsintegra
Don't

RE: FTID gone wrong, How can I Improve. +Public Service Annoucement. - bumbuls6 - 12-07-2023

Quote:Isn't dry ice just going to melt and cause mega suspicion in the warehouse? Like I could wrap it in some insulation to delay the inevitable or am I meant to  keep it in a plastic container it cant leak from?
for dry ice to work, the package needs to be weighed. so you take an empty box put dry ice in, tape it, and put some other colored tape so it's noticeable go to the post office on Friday when they are closing so it evaporates on weekends.

RE: FTID gone wrong, How can I Improve. +Public Service Annoucement. - msav101 - 12-07-2023

(12-04-2023, 09:20 PM)Ellsyian Wrote: UPS UK for reference. I was using the S/N method and even had to send in a video, which I did, everything was going great until I got this message:
"We've confirmed with the carrier that this shipment was flagged as a fraud risk. This can occur if the carrier identifies modifications to the label or other attempts to tamper with the package. We are unable to process a refund or provide a replacement. Ticket close. You cannot reply."

For this I used a very popular boxing service on Nulled - MrsIntegra - don't use them, utter morons

I'm not sure what caused this to fail. I understand that for UK, UPS has an identifier like GBR ### #-## - this is limited to a small geographic area - commander fucknugget above had the ftid destination more than 150 miles outside of that zone. It could also be that address has been used more than a hooker on black Friday.

This is what I have when I plug in the tracking number:

Your shipment
Removed for privacy
  Delivered On
Day of the Week, Month, ## in month at 14:14 at Dock

Returned To
BILSTON GB

Received By:
JON
Proof of Delivery

So what do I do? I had 2 ideas - Involving regenerating the scanning barcode that contains the address to a different nearby address and text editing the "Ship to" information to 1 of the 2 below

(1)Find a business that accepts envelopes - Will the ftid fail If I put the label on an envelope instead of a package - envelope is obviously easier to get accepted but if that lowers the success rate I have no problem with an actual box.

(2)Try to get the real name and address of someone that lives in the nearby area and address it to them.

I don't know how to do number 1 - perhaps just find a warehouse or factory in the area. Number 2 will be a pain in the ass.

I'd really appreciate any and all advice on this. Don't assume I know anything.
\

I would class FTID as dead, in the new age I see you are doing SN right now. . I tried it on 10 items the item got lost and I didnt get anything. I used an envelope as its easier, I put in junk mail so they think it's an AD.