[yuyboy]

Hi all.
How i can hack "WPA - CCMP,WPA- TKIP" using windows.
I try alot to use commview for wifi but it dosn't work with me.
If there are tricks and its work please post here.

Thanks

[RaccoonCity_mybb_import13707]

Why do you have to use Windows?
Use Aircrack-ng in Linux, much easier in my opinion, though I've never tried cracking WPA, WEP, etc in Windows.

[yuyboy]

I dont have backtrack

[RaccoonCity_mybb_import13707]

I dont have backtrack

You don't need backtrack for it, you can use any distrobution for it.
It's also very easy to use as a virtual machine on your computer.
Simply download it.
Either that or you can just look for some tutorial on Windows.
The only method I've found and worked for me is the Aircrack-ng one.

:]

[yuyboy]

Ok can you tech me how i can do what you say?
Its ok if you make thread about that and explen more step by step.

Thanks

[Spirit]

@yuyboy, there are literally thousands of tutorials teaching how to use/install a Linux OS.
Don't be lazy and just Google it.

[HomeSen]

Basically, cracking WPA(2) under Windows works as follows:

1. Run Wireshark with your WiFi being set to promiscious mode
   
2. Capture the full initial 4-way-handshake (since this is the only traffic that gets encrypted by the WPA-PSK) and save the capture file in "pcap format".
   
3. Get a decent dictionary (since aircrack-ng only allows dictionary attacks against WPA). You can safely strip out every (pass)word in the dictionary that is shorter than 8 characters, since the WPA-PSK has to be 8-64 characters long.
   
4. Download aircrack-ng (there is a Windows version of it with [due to OS restrictions] limited functionality. but we only need the cracker, anyways). I'd recommend using the 1.x beta release, since performance had increased by a lot, when switching from 0.9 to 1.x
   
5. Feed your saved capture file and the dictionary into aircrack-ng
   
6. depending on the size of your dictionary (and if it contains the WPA-key), you need to be very patient, until it found the key
   

Since Windows (same applies to MacOS X, by the way) doesn't allow packet injection (without specialized hardware), you need to be lucky to get a client logging in to the WPA-protected WiFi. If you were on Linux, you would only need a client that is already connected, since you could then inject a DEAUTH packet "into the air", so that the client simply reconnects.
But since all this is "academical" (right?), you can just make a second client connect to your WPA-protected WiFi and sniff the connection phase.

If you are lucky, and have a supported WiFi-NIC, you can even only use the aircrack-ng suite to perform the actions, since some NICs are capable of operating in monitor-mode under Windows (check the "Supported by airodump for Windows" column for your WiFi chipset): http://www.aircrack-ng.org/doku.php?id=c...ty_drivers

[yuyboy]

Basically, cracking WPA(2) under Windows works as follows:

1. Run Wireshark with your WiFi being set to promiscious mode
   
2. Capture the full initial 4-way-handshake (since this is the only traffic that gets encrypted by the WPA-PSK) and save the capture file in "pcap format".
   
3. Get a decent dictionary (since aircrack-ng only allows dictionary attacks against WPA). You can safely strip out every (pass)word in the dictionary that is shorter than 8 characters, since the WPA-PSK has to be 8-64 characters long.
   
4. Download aircrack-ng (there is a Windows version of it with [due to OS restrictions] limited functionality. but we only need the cracker, anyways). I'd recommend using the 1.x beta release, since performance had increased by a lot, when switching from 0.9 to 1.x
   
5. Feed your saved capture file and the dictionary into aircrack-ng
   
6. depending on the size of your dictionary (and if it contains the WPA-key), you need to be very patient, until it found the key
   

Since Windows (same applies to MacOS X, by the way) doesn't allow packet injection (without specialized hardware), you need to be lucky to get a client logging in to the WPA-protected WiFi. If you were on Linux, you would only need a client that is already connected, since you could then inject a DEAUTH packet "into the air", so that the client simply reconnects.
But since all this is "academical" (right?), you can just make a second client connect to your WPA-protected WiFi and sniff the connection phase.

If you are lucky, and have a supported WiFi-NIC, you can even only use the aircrack-ng suite to perform the actions, since some NICs are capable of operating in monitor-mode under Windows (check the "Supported by airodump for Windows" column for your WiFi chipset): http://www.aircrack-ng.org/doku.php?id=c...ty_drivers

Thank you! I will try it out.

Hope it's work with me..

Thank you again.

[HomeSen]

Anytime

If you have more questions, just ask

[BlueCat]

Hi all.
How i can hack "WPA - CCMP,WPA- TKIP" using windows.
I try alot to use commview for wifi but it dosn't work with me.
If there are tricks and its work please post here.

Thanks

Why do you have to use Windows?
Use Aircrack-ng in Linux, much easier in my opinion, though I've never tried cracking WPA, WEP, etc in Windows.

You can boot Linux off a 4GB USB drive. You would of course need to make your USB bootable by installing Universal USB installer. You can get that Here: http://www.ubuntu.com/download/desktop/c...on-windows

Once you have that on your computer, then you would need to download this: http://www.linuxmint.com/edition.php?id=144